Guangdong EuroKlimat Air-Conditioning & Refrigeration Co., Ltd
5 1

Environment Friendly 63kw Air Cooled Modular Chiller R410A Heat Pump

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price
You may also be intersted in
68kw r410a refrigerantair cooled heat pump

Contact us

Guangdong EuroKlimat Air-Conditioning & Refrigeration Co., Ltd
[China]

Address
Euroklimat Industrial Park, Huangjiang Dongguan Guangdong China 523766 Dongguan Guangdong
Phone
86-0769-83660888
Contact name
LENG

Quick Information

  • Brand Name: EuroKlimat
  • Place of Origin: China
  • Model Number : EKAC 220BR1

Description

63 kW Air cooled modular chiller heat pump unit with environment friendly refrigerant model

 

Specifications:

 

Technical data sheet

 

 

Model EKAC 220BR1 EKAC 440BR1 EKAC 660BR1 EKAC 880BR1 EKAC 1100BR1 EKAC 1320BR1
Unit combination Master unit

EKAC

220BR1M

EKAC

220BR1M

EKAC

220BR1M

EKAC

220BR1M

EKAC

220BR1M

EKAC

220BR1M

slave unit --

EKAC

220BR1S

2EKAC

220BR1S

3EKAC

220BR1S

4EKAC

220BR1S

5EKAC

220BR1S

Nominal cooling capacity kW 63 126 189 252 315 378
USRT 17.92 35.84 53.76 71.68 89.6 107.52
×104kcal/h 5.42 10.84 16.26 21.68 27.1 32.52
Nominal heating capacity kW 68 136 204 272 340 408
USRT 19.34 38.68 58.02 77.36 96.7 116.04
×104kcal/h 5.85 11.7 17.55 23.4 29.25 35.1
Total power of nominal cooling capacity kW 19.0 38 57 76 95 114
Total power of nominal heating capacity kW 19.8 39.6 59.4 79.2 99 118.8
Power supply 380V/3N~/50Hz
Refrigerant Type R410A
Control Electronic expansion valve
Compressor Type Fully hermetic volute compressor
Lubricant Grease (POE-160SZ)
Qty. Set 2 4 6 8 10 12
Fan Type High-efficiency vacuum braze-welded panel type
Qty. Set 2 4 6 8 10 12
Water side heat
exchanger
Type High-efficiency vacuum braze-welded panel type
Water flow for
cooling
m3/h 10.8 21.6 32.4 43.2 54 64.8
Water flow rate
in heating mode
3
m /h
11.7 23.4 35.1 46.8 58.5 70.2
Water resistance kPa 43 43 43 43 43 43
Recommended diameter for general inlet/outlet water pipe inch ≥2 ≥3 ≥3 ≥4 ≥4 ≥5
Power cable specification Section area of live line 2
mm
≥10 ≥35 ≥70 ≥95 ≥120 ≥150
Qty. of live lines 3
Section area of null line 2
mm
≥4
Qty. of null lines 1
Section area of grounding line 2
mm
≥10 ≥16 ≥35 ≥50 ≥60 ≥75
Qty. of grounding lines 1
Dimensions L x H mm 2012×1840
Width mm 880 2125 3370 4615 5860 7105
Unit weight Net weight kg 515 1030 1545 2060 2575 3090
Operating weight kg 525 1050 1575 2100 2625 3150

 

Note:
Test conditions for nominal cooling capacity: outlet water temperature 7°C; water flow: 0.172m3/(h·kw); outdoor ambient temperature 35°C.
Test conditions for nominal heating capacity: outlet water temperature 45°C; water flow: 0.172m3/(h·kW); outdoor dry/web bulb temperature
7°C/6°C.
Water resistance at the air conditioner side includes water pressure drop of the unit and the attached Y-shaped filter.
Main Pipes of combined units need to be customized and installed on site. The diameter of the pipes must meet design requirements. EK
does not provide the pipes.
Modular units can be formed using the 1 - 16 basic modules of same type or of different types as per practical needs. The above table lists
the parameters for common module combinations.
For on-site electric wiring, see the name plate or installation menu of the unit.

 

Decription

 

   1. The unit uses environment friendly refrigerant R410A.                                                                                        • The R410A refrigerant does not cause any ozone depletion.                                                                      • The heat exchange performance is excellent, improving the COP.    

         • Less refrigerant is used, reducing the green house effect.

2. The unit features an efficient scroll compressor and heat exchanger. Modules of the system are best matched to improve heat exchange efficiency. The unit uses efficient and environment friendly refrigerant R410A, providing a higher COP. Multi-loop compressors are used to provide multiple capacity adjustment gears. This reduces startup current and electric investment. Excellent COP greatly reduces energy consumption and operation cost.

 

3. Before powering on and turning on the unit, you just need to connect the water pipe of each module to the main water pipe. A special access door is provided so that any inter parts of the unit can be conveniently serviced.

 

4      • A low-sound fan generates little operation sound and vibration.       

        • R410A scroll compressor generates little operation sound and vibration.

        • A flexible installation base further reduces operation vibration.    

        • Air outlet pipes of the compressor are optimized to reduce vibration passed to the unit.

 

Advantage

 

The modular air-cooled heat pump unit with environment friendly refrigerant model uses new-generation R410A refrigerant which does not cause ozone depletion. The unit features optimized system design and an excellent COP. The unit is not only cost effective but also environment friendly,
easy to operate, reliable in performance, and can be installed flexibly. Therefore, units of this series are widely used in dining halls, bars, hotels, offices, top-tier clubs, hospitals, etc.


Product Image

  • Environment Friendly 63kw Air Cooled Modular Chiller R410A Heat Pump image

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To LENG
Guangdong EuroKlimat Air-Conditioning & Refrigeration Co., Ltd
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Other Plastic Processing Machinery
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.